Products
Heating Wire, Cable
G.K. Enterprises provides complete solutions for Industrial and Domestic Heat Tracing applications. Making the system more efficient, getting quality products or making your life style more comfortable, the following product finds its uses depending upon the need and application. Heating cables have been categorized as follows:-
Constant Wattage Series Circuit
Construction
Technical Data: -
Supply Voltage: 230 V AC (Other rated voltages can also be designed)
Minimum environment temperature: Minus 55 deg.C
Minimum operating surface temperature: + 260 deg.C
Maximum bending radius: 6 x diameter
Minimum Resistant: Yes
Minimum O.D. : 3.0 mm ( Diameter at joints is higher)
Type of joint: Water proof
Range :-
* Always specify heater length along with order.
Reliability:
Water proof joints at each end of hot wire (heating cables), increases reliability & is quite safe in operation.
| S. No. | Element | Detail | Advantage |
| 1 | Heating element | Spirally wound Nicrome wire on glass fiber cord. | Very low temp. coefficient Good Tensile Strength |
| 2 | Insulation | Tape Wrapped PTFE | Max. temp. 260 Deg.C |
| 3 | Shielding | S.S. braid | For Earthing and Mechanical Protection |
| 4 | Cold Lead | PTFE insulated SPC wire | Low Contact resistance |
Technical Data: -
Supply Voltage: 230 V AC (Other rated voltages can also be designed)Minimum environment temperature: Minus 55 deg.CMinimum operating surface temperature: + 260 deg.CMaximum bending radius: 6 x diameterMinimum Resistant: YesMinimum O.D. : 3.0 mm ( Diameter at joints is higher)Type of joint: Water proofRange :-
| Part No. | Wattage watt/m | Max. Operating Temp.(deg.C) | Max. Diameter (mm) | Heater Length (m)* |
| CWST10 | 10 |
260 | 3 | According to Customer |
| CWST20 | 20 | 260 | 3 | requirement |
* Always specify heater length along with order.
Reliability:
Water proof joints at each end of hot wire (heating cables), increases reliability & is quite safe in operation.