A concept in comfort engineering. This is a very comfortable system as the temperature is identical all over the room,gives a cozy effect, there is no temperature variation like with the conventional heat sources. These UTH affixed over the mats when installed under the floor, provides the best comfort in radiant floor heating efficiently.

S. No.	Element	Detail	Advantage
1.	Conductor	Multistrand Stranded / Spirally Wound	Flexible and High tensile Strength
2.	Primary Insulation	Tape Wrapped Sintered PTFE	Max. Temp. 260 deg. C
3.	Shielding	Tin Plated Copper Braid	For Mechanical Strength
4.	Jacket	Tape Wrapped Sintered PTFE	Chemical and Moisture Resistant

Technical Data
Supply Voltage : 230 V (Other rated voltages can also be designed)
Minimum environment temperature: Minus 55 deg.C
Maximum operating temperature: +260 deg.C
Maximum output : 15 w/m
Minimum bending radius : 10 mm
Moisture Resistant : Yes
Above heaters are designed at 10 w/m, (Other ratings can be designed on request.)
We can supply attached cold lead also with every heater.
Every heater is tested at 3400 V for one second and 2000 V for one minute.
Resistance tolerance +/- 5%.

Range :-

Part No.	Wattage (watt)	Length (m)	Resistance (ohm/m)	Jacket Color
UTH015	150	15	23.51	Wh/Bk
UTH020	200	20	13.23	Wh/Br
UTH025	250	25	8.46	Wh/Rd
UTH030	300	30	5.88	Wh/Or
UTH040	400	40	3.31	Wh/Yw
UTH050	500	50	2.12	Black
UTH060	600	60	1.47	Brown
UTH075	750	75	0.94	Red
UTH0100	1000	100	0.53	Orange
UTH0125	1250	125	0.34	Yellow
UTH0150	1500	150	0.24	Grey
UTH0175	1750	175	0.17	Blue
UTH0200	2000	200	0.13	Violet
UTH0250	2500	250	0.08	Green
UTH0300	3000	300	0.06